[Manifold-l] FW: 7x display issues

[Martin Roseveare]

I've found that importing each component into a new project tends to
work, but we really shouldn't have to, especially for projects created
in 7x! What is it about Manifold that means it has these issues? For
.NET based code it seems a bit surprising, unless it's something to do
with the graphics capabilities of the .NET engine itself.

 

Martin

Martin Roseveare
Senior Geophysicist


Web: www.archaeophysica.co.uk
Phone: +44 (0) 1989 730 564
Fax: +44 (0) 7050 369 790

This e-mail and any attachment may contain proprietary or confidential
material and be subject to legal privilege. If you have received it in
error please promptly erase it from your system and inform the sender.
It should not be copied, disclosed to, retained or used in any way by
any other party.

Nothing in this e-mail should be regarded as representing a binding
contract unless explicitly stated otherwise. All opinions are those of
the sender and not necessarily ArchaeoPhysica Ltd.

________________________________

From: F Whiteley [mailto:franciswhiteley at btconnect.com] 
Sent: 18 December 2006 15:46
To: Martin Roseveare; 'Manifold List (E-mail)'
Subject: RE: [Manifold-l] FW: 7x display issues

 

When I moved to 7.0 one of my projects would not re-paint.  I noticed I
could see everything if I moved another window over the one I wanted to
see.  

 

I copied every component one by one into a new project and seemed to
recover the data.  I haven't had a problem since.

 

Francis

 

________________________________

From: manifold-l-bounces at directionsmedia.net
[mailto:manifold-l-bounces at directionsmedia.net] On Behalf Of Martin
Roseveare
Sent: 15 December 2006 09:45
To: Manifold List (E-mail)
Subject: [Manifold-l] FW: 7x display issues

 

Hi everyone.

 

I'm wondering whether anyone else has experienced a problem with 7x like
the following and whether there is a known work-around or fix?

 

We are repeatedly getting a problem whereby a project created in 32bit
7x will work fine for a while but will all of a sudden stop displaying
any components. It's literally as bad as that - there is no distinction
between type of component for example. We just get an empty window, not
even a background. It also doesn't seem to matter which machine the
project was created and/or viewed on either.

 

Martin

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.directionsmedia.net/pipermail/manifold-l/attachments/20061218/6201d62d/attachment-0001.htm