[Geomedia-l] problem plotting layout

[j.haffly at cox.net]

Good job!!!  I will have to print that response from Mary so in case I have that issue I'll have a first thing to try....

However, is it really a "bug"?  Since just making sure your default printer is the correct one, I personally dont see that as an issue to be honest....but that's just my .02cents....

Jim


---- Martin Zoepfl <mazop at gmx.at> wrote: 
> Hallo Mary,
> 
> Thanks a lot for your hint(s)!
> All i had to do do make everything work like expected/it should was really just defininging the Plotter i use for plotting the GM Layout as default system-printer!
> And now, plotting large layouts works like a charm :)
> 
> Thanks again ! This bug nearly drove me nuts ;)
> 
> Cheers
> 
> Martin
> 
> 
> -------- Original-Nachricht --------
> Datum: Wed, 25 Jul 2007 08:17:38 -0700
> Von: "Mary Phillips" <mary_phillips at co.benton.wa.us>
> An: "Martin Zoepfl" <mazop at gmx.at>, geomedia-l at lists.directionsmag.com
> Betreff: Re: [Geomedia-l] problem plotting layout
> 
> > Hello Martin,
> > We had a similar problem here.  Turns out that a small printer was set
> > as a default and when we tried to print a large map it would hang up
> > before even getting to the printer dialog window.  We found 2 ways
> > around it.  Either make the large plotter your default printer, or start
> > on a small (8 1/2x 11) layout sheet, start the print process and when
> > the printer dialog window comes up switch to your plotter.  Then you
> > should be able to go to your large format layout sheet and print from
> > there.
> > 
> > Cheers,
> > 
> > Mary Phillips
> _______________________________________________
> GeoMedia-l mailing list
> GeoMedia-l at lists.directionsmedia.net
> http://www.directionsmedia.net/mailman/listinfo/geomedia-l