[Geomedia-l] Could not log Update in ModificationLog and operation aborted error

[Jorge Antunes]

Hi Jeff,
Thanks for the tip but it didn't work.
The solution I found was to create a new warehouse and export the feature to
this new warehouse. This way it seams to "cleared" the modification log,
allowing me to insert new features
Best regards,
Jorge Antunes


2007/1/24, Jeff_Hobbs at sjwater.com <Jeff_Hobbs at sjwater.com>:
>
> It sounds like GM is having problems reading the ModificationLog table.
> You might want to try the "Clear Modification Log" command in the database
> utilities and see if that clears things up.
>
> Jeff
>
>
>
>
> --------------------------------
> Jeff Hobbs
> GIS Supervisor
> San Jose Water Company (NYSE:SJW)
> 1265 South Bascom Avenue
> San Jose, CA 95128
> Voice - (408) 279-7833
> Fax - (408) 279-7889
> jeff_hobbs at sjwater.com
> http://www.sjwater.com
>
> -----Original Message-----
> From: geomedia-l-bounces at directionsmedia.net
> [mailto:geomedia-l-bounces at directionsmedia.net] On Behalf Of
> jorgeantunes at gmail.com
> Sent: Wednesday, January 24, 2007 13:31
> To: geomedia-l at directionsmedia.net
> Subject: [Geomedia-l] Could not log Update in ModificationLog and
> operation aborted error
>
> Hi
> I'm having the error messasge: "Could not log Update in ModificationLog
> and operation aborted" whenever I try  insert a feature.
> Any ideias ?
> best regards,
> Jorge
> _______________________________________________
> GeoMedia-l mailing list
> GeoMedia-l at lists.directionsmedia.net
> http://www.directionsmedia.net/mailman/listinfo/geomedia-l
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.directionsmedia.net/pipermail/geomedia-l/attachments/20070125/ac269418/attachment.html